Higher
yield due to work-sharing is achieved by linking the two power circuits
using the MIX™ concept, our optimised master-slave system. In the
part-load range only one of the two power stage sets operates, while
both work together at full-load. The advantages are a noticeable
increase in yield with a simultaneous reduction in operating hours.
As the input voltage range of the Fronius IG 60 has been expanded from the former 500 V to 530 V, longer module strings can be connected. Due to this improvement, the product name changed from “Fronius IG 60” to “Fronius IG 60 HV”. “HV” stands for “High Voltage”.
Fronius IG | 40 | 60 HV |
|---|---|---|
Input Data | ||
MPP voltage range | 150 - 400 V | 150 - 400 V |
Max. input voltage (at 1000 W/m²; - 10° C) | 500 V | 530 V |
PV system output | 3500 - 5500 Wp | 4600 - 6700 Wp |
Max. input current | 29,4 A | 35,8 A |
Output Data | ||
Nominal output | 3500 W | 4600 W *) |
Max. power output | 4100 W | 5000 W |
Max. efficiency | 94,3 % | 94,3 % |
Euro efficiency | 93,5 % | 93,5 % |
Mains voltage /frequemcy | 230 V / 50 Hz (60 Hz) | |
Distortion factor | < 3,5 % | |
Power factor | 1 | |
Power consumption at night | 0 W | |
General Data |
|
|
Size l x w x h | 610 x 344 x 220 mm (733 x 435 x 225 mm) | |
Weight | 16 kg (20 kg) | |
Cooling | controlled forced-air cooling | |
Protection class (housing) | IP 21 (IP 45) | |
Ambient temperature range | - 20 ... 50° C | |
Permissible humidity | 0 ... 95 % | |
Protective Devices |
|
|
DC insultion measurement | warning when Riso < 500 k Ohm | |
Polarity reversal protection | built-in | |
Behaviour on DC overload | displacement of operating point | |
|
|
|
Important note:
Fronius IG 60 HV with Setup ES and Setup IT are supplied with a nominal output of 5,000 W