Fronius IG TL Inverters

The Fronius IG TL series are transformerless PV inverters with standard system monitoring.

The consistent expansion of a successful family: The Fronius IG TL incorporates all the advantages of a transformerless inverter concept with the high innovation and quality demands of Fronius. Perfect for system sizes ranging from single-family homes up to agricultural or commercial operations. Unique in its class is the standard system monitoring which makes it the most future-proof transformerless inverter providing maximum earnings security.

Fronius IG TL 3.0

System monitoring with the Status Manager comes standard with the Fronius IG TL. This includes following features:

• String malfunction detection

• Detailed status codes

• Direct signaling contact

The Status Manager immediately reports any problems throughout the entire system thus locking in system yields for the long-term.

It also has a unique feature in which a commercially-available USB stick can be used for easy system monitoring as well as simple inverter updating.

                                                                                            back to top

Fronius IG TL 3.6

                                                           

System monitoring with the Status Manager comes standard with the Fronius IG TL. This includes following features:

• String malfunction detection

• Detailed status codes

• Direct signaling contact

The Status Manager immediately reports any problems throughout the entire system thus locking in system yields for the long-term.

It also has a unique feature in which a commercially-available USB stick can be used for easy system monitoring as well as simple inverter updating.

Fronius IG TL 4.0

System monitoring with the Status Manager comes standard with the Fronius IG TL. This includes following features:

• String malfunction detection
• Detailed status codes
• Direct signaling contact

The Status Manager immediately reports any problems throughout the entire system thus locking in system yields for the long-term.

It also has a unique feature in which a commercially-available USB stick can be used for easy system monitoring as well as simple inverter updating.

                                                                                                                                                                                                 back to top

INPUT DATA	Fronius IG TL 4.0
DC maximum power	4190 W
Max. input current	12.0 A
Max. input voltage	850 V
MPP voltage range	350 - 700 V
OUTPUT DATA
AC nominal output	4000 W
Max. output power	4000 W
Max. output current	17.4 A
Max. efficiency	97.7 %
European efficiency	97.3 %
MPP adjustment efficiency	99.9 %
Mains connection	1~NPE 230 V
Frequency	50 Hz / 60 Hz
Distortion factor	< 3 %
Power factor	1
Nighttime consumption	< 1 W
GENERAL DATA
Dimensions (H x W x  D)	597 x 413 x 195 mm
Weight	19.1 kg
Degree of protection	IP 55
Inverter	Transformerless
Cooling	Controlled air cooling
Installation	Indoors and outdoors
Ambient temperatur range	-20°C to +55°C
Permitted humidity	0 % to 95 %
PROTECTIVE EQUIPMENT
DC insulation measurement	Universal-current-sensitive fault monitoring
Overload behaviour	Operating point adjustment, power limitation
DC disconnector	Integrated
INTERFACES
USB A socket	For USB sticks* no bigger than 80 x 33 x 20 mm (L x W x H)
Signalling output (NO contact)	2-pin screw terminal, 12V max. 300 mA
2x RJ45 sockets (RS485)	Solar Net interface, interface protocol

 

* Please refer to the information in the operating instructions regarding the use of USB sticks (temperature range).

Fronius IG TL 4.6

Zoom closeGet plugged into the future!

System monitoring with the Status Manager comes standard with the Fronius IG TL. This includes following features:
String malfunction detection
Detailed status codes
Direct signaling contact
The Status Manager immediately reports any problems throughout the entire system thus locking in system yields for the long-term.


It also has a unique feature in which a commercially-available USB stick can be used for easy system monitoring as well as simple inverter updating.

---

INPUT DATA	Fronius IG TL 4.6
DC maximum power	4820 W
Max. input current	13.5 A
Max. input voltage	850 V
MPP voltage range	350 - 700 V
OUTPUT DATA
AC nominal output	4600 W
Max. output power	4600 W
Max. output current	20 A
Max. efficiency	97.7 %
Euro. efficiency	97.3 %
MPP adaptation efficiency	> 99.9 %
Grid connection	1~NPE 230 V
Frequency	50 Hz / 60 Hz
Harmonic distortion	< 3 %
Power factor	1
Night consumption	< 1 W
GENERAL DATA
Dimensions (height x width x depth)	597 x 413 x 195 mm
Weight	19.1 kg
Degree of protection	IP 55
Inverter concept	Transformerless
Cooling	Regulated air cooling
Installation	indoor and outdoor installation
Ambient temperature range	From -20°C to +55°C
Permitted humidity	0 % to 95 %
SAFETY EQUIPMENT
DC insulation measurement	AC/DC sensitive fault current monitoring
Overload behavior	Operating point shift, power limiter
DC disconnect	integrated
INTERFACES
USB A socket	For USB sticks* with max. dimensions of 80 x 33 x 20 mm (L x W x H)
Message output (normally-open contact)	2-pin screw terminal, 12 V max. 300 mA
2x RJ45 sockets (RS485)	Solar Net interface, interface protocol

* Please see the operating instructions for information about the use of USB sticks (temperature range).

The right to make technical modifications is reserved.

Fronius IG TL 5.0

System monitoring with the Status Manager comes standard with the Fronius IG TL. This includes following features:

• String malfunction detection
• Detailed status codes
• Direct signaling contact

The Status Manager immediately reports any problems throughout the entire system thus locking in system yields for the long-term.

It also has a unique feature in which a commercially-available USB stick can be used for easy system monitoring as well as simple inverter updating.

 

Technical Data

INPUT DATA	Fronius IG TL 5.0
DC maximum power	5250 W
Max. input current	15.0 A
Max. input voltage	850 V
MPP voltage range	350 - 700 V
OUTPUT DATA
AC nominal output	4600 W* / 5000 W
Max. output power	5000 W
Max. output current	21.7 A
Max. efficiency	97.7 %
European efficiency	97.3 %
MPP adjustment efficiency	99.9 %
Mains connection	1~NPE 230 V
Frequency	50 Hz / 60 Hz
Distortion factor	< 3 %
Power factor	1
Nighttime consumption	< 1 W
GENERAL DATA
Dimensions (H x W x  D)	597 x 413 x 195 mm
Weight	19.1 kg
Degree of protection	IP 55
Inverter	Transformerless
Cooling	Controlled air cooling
Installation	Indoors and outdoors
Ambient temperatur range	-20°C to +55°C
Permitted humidity	0 % to 95 %
PROTECTIVE EQUIPMENT
DC insulation measurement	Universal-current-sensitive fault monitoring
Overload behaviour	Operating point adjustment, power limitation
DC disconnector	Integrated
INTERFACES
USB A socket	For USB sticks** no bigger than 80 x 33 x 20 mm (L x W x H)
Signalling output (NO contact)	2-pin screw terminal, 12V max. 300 mA
2x RJ45 sockets (RS485)	Solar Net interface, interface protocol

 

*   Fronius IG TL 5.0 devices for Germany, Austria, Belgium and Czech Republic have an AC nominal output of 4600 W.

* *Please refer to the information in the operating instructions regarding the use of USB sticks (temperature range).

                                                                                                                                                                                                            

                                                                                                                                       back to top