GB SOL Semi-Flexible Solar Modules    

                                                                                                                                                                                                               

GBSOL Semi-Flexible Mono-crystalline Solar Panels
The unique design of these extreemly lightweight Semi-Flexible Solar Panels makes them suitable for numerous applications.Their price performance is the principle advantage as the monocrystalline cell is highly efficient, typically around 15%.They are Robust, glass free, 50% lighter than conventional modules and have a very strong terminal box. Their low profile means there is less visual impact and also means they are suitable for installation on to vehicles as there is less wind noise and vibration.The ability to fit the panel to flat/ slightly curved surfaces means easy installation as no mounting frame is required, it also means adhesive can be used which makes the panel very difficult to steal.

The absence of glass and the robust construction means the panel can be walked on and that it is difficult to vandalise. They have been manufactured in Europe accordance with ISO 9001-2002 and conform to CE,TUV and IEC 61215 specifications.The exceptional low weight of these panels make them suitable for use where mobility is important.

GBSOL 70Wp Semi-flexible Solar Module                       

  

GBSOL 35Wp Semi-flexible Solar Module

Warranty

Freedom from defects in materials and workmanship for 1 year. Minimum 80% output in 20 years.

Quality and Safety

The GBSOL 60 module is manufactured in an ISO 9001-2008 certified factory. Produced in a TUV IEC 61215 & safety class 2 approved process. MCS accredited BABT 8501.

  Semi-Flexible Modules on-board      

Semi-Flexible Modules for MPV & Motorhomes 


                     

 

Module Number

GBSOL 18WF

Dimensions

655 x 340 x 14

Output

18Wp

Voltage @Pmax

17.3v

Current @ Pmax

1.05A

Weight

1.5Kg

Data Sheets

GBSOL 18F

GBSOL 35WF

400 x 800 x 14

35Wp

18.4v

1.85A

2.0Kg

GBSOL 35F

GBSOL 70WF

700 x 800 x 14

70Wp

18.4V

3.75A

3.0Kg

GBSOL70F


Bespoke Modules

GBSOL can produce modules from 1 Watt to 250 Watts, in sizes and voltages as required. Pricing and lead times are very dependent on the design and quantitiy ordered.

The in-house design engineering department can design panels to meet client needs based on load safety standards and design requirements.

Panels can be supplied either as framed modules or laminates. Modules can be supplied as rigid glass or semi-flexible monocrystalline or polycrystalline cells. 

                                                                              

Additional design options

  • Glass / Foil Laminates ยท Glass / Glass Laminates / Non Standard Shapes / Sizes
  • Embedded Diode Panels
  • Flexible Laminates
  • Dummy Panels
  • Coloured Backing Sheets

High Efficiency and Performance Guarantee

The efficient silicon technology and the anti-reflection layer permit optimal efficiency. This guarantees high performance during low irradiation and months with diminished light. GBSOL solar panels have a 25 year design life.

Quality Control

Each Solar panel is individually measured during and after the manufacturing process under the highest quality and ISO conditions. Every panel is tested under STC conditions and are certified.

Mounting

The panels have a robust and seawater resistant aluminium frame, the frame profile provides stability and easy installation, also the solar panels have a waterproof junction box

Applications

These panels can be used for a variety of applications including boats, camper vans, holiday homes, summerhouses and specialist applications.

These modules have been designed for boats,caravans,mobile homes or other marine applications and working off grid.Even the use of small solar panels will give enough energy for on board electronics and increase battery service life.

An alternative to all oversized, rigid or inflexible glass panels, all materials are high quality and have been subjected to numerous stress tests, are robust, durable and completely weatherproof.

The tri-wall Tedlar foil backing is seawater proof and acid resistant, the cable outlet is potted and screwed to the solar panel which rules out cable oxidisation and penetration of moisture into the panel. The cable is also made of weatherproof material and does not become brittle when exposed to strong solar radiation, wind and water.

This range can be fixed with adhesive or screwed and due to the synthetic surface will shape around slight curves, they can also be walked upon with no fear of broken glass or damage.

All solar panels are individually tested for high performance and long service life.