Renewable Energy Solutions :: Tel: 0208 935 5139

Victron Energy Skylla TG 24V 100A Battery Charger

The Victron Skylla 24V 100A Battery Charger is the perfect battery chargers for any type of battery. Charge voltage can be adjusted to suit any sealed or vented battery system.

  • Microprocessor controlled three stage charging
  • Models accept DC as well as AC input
  • Can be used as a DC power supply
  • 24V models feature additional 12V 4A isolated output to top up a starter battery
  • Voltage & temperature sensors included for accurate charging


Victron Energy
Skylla 24V 100A Battery Charger

The Skylla charger system has one full rated output and one 4 Amp output.

The 4 Amp output is intended to maintain an engine start battery. This output is provided by a separate charging circuit to the main outputs. It is a constant voltage float charge output only, to prevent overcharging the engine start battery.

The charge voltage can be precisely adjusted to suit any battery system.

Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance.

An external sensor allows the user to measure battery temperature and compensate charge voltage accordingly.

Input Voltage (V AC): 230
Input Voltage Range: 185-264 Vac or 180-400 Vdc
Frequency: 45-65Hz or DC
Power Factor: 1
Charge Voltage 'absorption' (V DC): 28.5
Charge Voltage 'float' (V DC): 26.5
Charge Current House Batt. (A): 100
Charge Current Starter Batt. (A): 4
Charge Characteristic: IUoUo (3 Step)
Battery Capacity: 500-1000
Temperature Sensor: Yes
Can Be Used As Power Supply: Yes
Forced Cooling: Yes
Humidity (non condensing): Max 95%
Operating temp.range: -20 to +60°C (0-140°F)
Material & Colour: Aluminium (blue RAL 5012)
Battery Connection:  M8 Studs
230V AC Connection:  Screw clamp 2.5mm²
Protection Category:  IP21
Weight (Kg): 10.0
Dimensions (mm) LxWxH: 365 x 250 x 257

  • Model: Skylla 24V 100A
  • Shipping Weight: 7Kgs
  • Manufactured by: Victron Energy